| Produktbeschreibung | Mellanox Spectrum SN2010 - Switch - 22 Anschlüsse - managed - an Rack montierbar |
| Gerätetyp | Switch - 22 Anschlüsse - L3 - managed |
| Gehäusetyp | Luftstrom von vorne nach hinten an Rack montierbar 1U |
| Untertyp | 100 Gigabit Ethernet |
| Ports | 18 x 25 Gigabit SFP28 + 4 x 100 Gigabit QSFP28 |
| Leistung | Switching-Kapazität: 1,7 Tbit/s Latenz: 300 µs Paket-Durchsatzrate: 2,52 Bpps |
| Kapazität | Multicast-Einträge (Layer 2): 256000 Virtuelle Schnittstellen (VLANs): 4000 Pufferkapazität (MB): 16 100 GbE Ports: 4 40 GbE Ports: 4 25 GbE Ports: 34 10 GbE Ports: 34 |
| Jumbo-Rahmenunterstützung | 9216 Byte |
| Routing Protocol | BGP-4, IGMPv2, VRRP, OSPFv2, statisches IP Routing, IGMPv3, PIM-SSM, statisches IPv4-Routing, statisches IPv6-Routing, Bidirectional Forwarding Detection (BFD) |
| Remoteverwaltungsprotokoll | SNMP 1, SNMP 2, Telnet, SNMP 3, SSH-2, CLI |
| Leistungsmerkmale | Flusskontrolle, Lastenausgleich, IGMP Snooping, Syslog-Unterstützung, Port-Spiegelung, Store-and-Forward, IPv6-Unterstützung, Hochverfügbarkeit, sFlow, Rapid Spanning Tree Protocol (RSTP)-Unterstützung, Multiple Spanning Tree Protocol (MSTP)-Unterstützung, Data Center Bridging Exchange (DCBX)-Unterstützung, Ereignisprotokoll, Unterstützung für Access Control List (ACL), RADIUS-Unterstützung, Rapid Per-VLAN Spanning Tree Plus (PVRST+), IPv4-Unterstützung, LLDP-Support, DHCP-Relais, Link Aggregation Control Protocol (LACP), E-Mail-Benachrichtigung, nicht blockierende Ports, Priority-Based Flow Control (PFC), Multi Chassis Link Aggregation Group (MLAG), Veranstaltungsbenachrichtigung, VLAN Double Tagging (Q-in-Q), Top-of-Rack (ToR), Protocol Independent Multicast (PIM) |
| Produktzertifizierungen | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3ba, IEEE 802.1Qbb, IEEE 802.1Qaz |
| Stromversorgung | Wechselstrom 120/230 V (50 - 60 Hz) |
| Abmessungen (Breite x Tiefe x Höhe) | 20 cm x 50.8 cm x 4.39 cm |
| Gewicht | 4.54 kg |
| Gerätetyp | Switch - 22 Anschlüsse - L3 - managed |
| Gehäusetyp | Luftstrom von vorne nach hinten an Rack montierbar 1U |
| Untertyp | 100 Gigabit Ethernet |
| Ports | 18 x 25 Gigabit SFP28 + 4 x 100 Gigabit QSFP28 |
| Leistung | Switching-Kapazität: 1,7 Tbit/s Latenz: 300 µs Paket-Durchsatzrate: 2,52 Bpps |
| Kapazität | Multicast-Einträge (Layer 2): 256000 Virtuelle Schnittstellen (VLANs): 4000 Pufferkapazität (MB): 16 100 GbE Ports: 4 40 GbE Ports: 4 25 GbE Ports: 34 10 GbE Ports: 34 |
| Jumbo-Rahmenunterstützung | 9216 Byte |
| Routing Protocol | BGP-4, IGMPv2, VRRP, OSPFv2, statisches IP Routing, IGMPv3, PIM-SSM, statisches IPv4-Routing, statisches IPv6-Routing, Bidirectional Forwarding Detection (BFD) |
| Remoteverwaltungsprotokoll | SNMP 1, SNMP 2, Telnet, SNMP 3, SSH-2, CLI |
| Authentifizierungsmethode | RADIUS, TACACS+, Secure Shell v.2 (SSH2), LDAP |
| Leistungsmerkmale | Flusskontrolle, Lastenausgleich, IGMP Snooping, Syslog-Unterstützung, Port-Spiegelung, Store-and-Forward, IPv6-Unterstützung, Hochverfügbarkeit, sFlow, Rapid Spanning Tree Protocol (RSTP)-Unterstützung, Multiple Spanning Tree Protocol (MSTP)-Unterstützung, Data Center Bridging Exchange (DCBX)-Unterstützung, Ereignisprotokoll, Unterstützung für Access Control List (ACL), RADIUS-Unterstützung, Rapid Per-VLAN Spanning Tree Plus (PVRST+), IPv4-Unterstützung, LLDP-Support, DHCP-Relais, Link Aggregation Control Protocol (LACP), E-Mail-Benachrichtigung, nicht blockierende Ports, Priority-Based Flow Control (PFC), Multi Chassis Link Aggregation Group (MLAG), Veranstaltungsbenachrichtigung, VLAN Double Tagging (Q-in-Q), Top-of-Rack (ToR), Protocol Independent Multicast (PIM) |
| Produktzertifizierungen | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3ba, IEEE 802.1Qbb, IEEE 802.1Qaz |
| RAM | 8 GB |
| Statusanzeiger | Link/Aktivität |
| Schnittstellen | 18 x 25Gbit LAN QSFP28 1 x Verwaltung (LAN) RJ-45 1 x seriell RJ-45 4 x 100Gbit LAN QSFP28 1 x USB mini-USB |
| Stromversorgungsgerät | Internes Netzteil |
| Installierte Anzahl | 2 |
| Max. unterstützte Anzahl | 2 |
| Erforderliche Netzspannung | Wechselstrom 120/230 V (50 - 60 Hz) |
| Leistungsaufnahme im Betrieb | 57 Watt |
| Rackmontagesatz | Optional |
| Produktzertifizierungen | VCCI, CB, FCC, RoHS, ICES, cTUVus, RCM, CU |
| Software inbegriffen | Cumulus Linux |
| Breite | 20 cm |
| Tiefe | 50.8 cm |
| Höhe | 4.39 cm |
| Gewicht | 4.54 kg |
| Min Betriebstemperatur | 0 °C |
| Max. Betriebstemperatur | 40 °C |
| Zulässige Luftfeuchtigkeit im Betrieb | 5 ? 85% (nicht-kondensierend) |
| Brand | Mellanox |